From Protoi Healing

Revision as of 16:06, 17 June 2016 by Grayfox (Talk | contribs)

Jump to: navigation, search

How to use the Protoi Healing Cards



Starting the healing process

You can start a healing process with the Healing Cards by following these simple steps:

  1. Write a good, unique identification of the person or group you wish to heal on a piece of paper.
    This can include the person's name, birth date, location and so on; groups can be identified similarly, with unique information pertaining to that particular group. You can also use a photograph of an individual or group. If the healing is for yourself, you can write "ME".

  2. Place this paper on the table.

  3. Select a healing tool to use: a Base Card or Pearlgonite, and place this healing tool on the identification paper.
    Pearlgonites have a much larger range of operation, see here.

  4. If you have a specific medical disease, look it up in the medical disease database. You can also use the search box (top-right corner).
    If you only have specific symptoms of a medical illness, and are not sure which medical disease it corresponds to, find the nearest medical disease corresponding to those symptoms in the disease database.

  5. On the disease category wiki page, see which subcode corresponds to the particular disease you wish to heal. Take note of the required Command Cards next to that subcode. For example, Acne vulgaris (ICD-10 code L70.0) requires cards 2.6 and 2.8.
    Note: If the healing is for another person and group 3 Command Cards are required (3.1 to 3.10), you must obtain that person's permission first. See below: Healings requiring group 3 Command Cards.

  6. Place the required Command Cards on top of the healing tool or the identification paper, the order does not matter.

  7. This step is optional, but recommended as it improves the effectiveness of the healing.
    Talk to the cards and describe the particular symptoms you are experiencing, as well as any other relevant information. This can only be done before the Go Card is used.

  8. Once you have selected all the Command Cards you wish to use and described your symptoms to the cards, use the Go Card by placing it on top of the Command Cards / healing tool / identification paper. This ends the programming of the healing tool and starts the healing process.



How long will the healing run?

Once the Go Card has been used, the healing process will run continuously until it is completed, even while you sleep. The healing will run as long as the target is within range of the healing tool (Base Card or Pearlgonite). If the target leaves the range, the healing process will pause until the target returns within range. If the target leaves the range of the healing tool for an extended period of time, the healing program may stop, so in such cases it is advisable to manually restart the healing when required.

All healings require a certain amount of time, and some healings take longer than others. The time required is unique to each case, it is not related to the number of Command Cards required. You may notice an improvement in symptoms or as little as an hour, or a few days. Difficult healings may require months.

Base Card or Pearlgonite?

Base Cards and Pearlgonites may be used interchangeably as the healing tool. The only difference is the range of operation. This varies from 5,3 to 350 km for Base Cards, and from 33 to 2200 km for Pearlgonites. The range is dependent on the structure of the healing crystals within the healing tool, and also on the group/s of Command Cards used. See here for the complete list of ranges. Note that a healing which uses multiple groups of Command Cards would have an effective range equal to that of the group with the shortest range. Group 2 cards have the shortest range of operation, followed by group 1 cards which have a moderate range, and finally group 3 cards which have the largest range.

Due to the relatively short range of Base Cards compared with Pearlgonites, it may be useful to give the healing target a Base Card to carry with them after starting a healing process, so that they are always in range of the healing.

Looking up a disease

The medical disease database is based on ICD-10 categories and codes. To look up a disease, you can use the medical disease database, or use the search box (in the top-right corner of every page). You can also search by ICD-10 code. To find an ICD-10 code for a disease, you can search in the WHO ICD-10 database. If you cannot find a disease category that is listed in the WHO ICD-10 database, you can register in the Protoi-Healing forum and request that it be added.

Missing Command Cards for subcodes in medical disease wiki pages will be updated soon.

How to operate the Healing Cards

The cards contain a powerful Artificial Intelligence (AI) which listens to your voice and executes permissible verbal commands. All instructions or commands should be given verbally.

Healings requiring group 3 Command Cards

If the healing is for someone else, and group 3 Command Cards are needed (3.1 to 3.10), you must obtain their permission before the cards will start the healing. The AI of the cards listens to your voice, so you may obtain this permission over the phone, within "earshot" of the cards; or in person when away from the cards, and then later instruct the cards to search your memory for the required permission. The cards will not search your memory without your permission.

See also: How do the Healing Cards work?

Describing your symptoms

Before the Go Card has been used, you can verbally describe your symptoms and any other related information to the cards, in order to improve the effectiveness and speed of the healing. The AI in the cards uses this information to improve the accuracy of the healing process, beyond the standard required Command Cards. This may only be done before using the Go Card. If you missed some important information and already used the Go Card, simply cancel the healing in progress with a verbal command, and begin the process again.

Setting schedules

You can set schedules when using the Healing Cards. For instance, you can start a healing, and then schedule another healing to run, conditional on the first healing process being completed: To do this, simply give a verbal command that the new healing is conditional on the current one (or ALL currently scheduled healings) being completed. Alternatively, you can set a time schedule for a certain healing to start, however, once a healing process has started, it cannot be interrupted without having to be completely restarted (by using the required Command Cards again, followed by the Go Card). You may also rearrange the order of pre-scheduled healings at any time, with no impact on the current healing in progress.

Setting priorities

You can set priorities when running multiple healings, one at a time, using the above method. Simply instruct the cards which healings to give more priority than the others, and these healing programs will run with the given priority.

Running multiple healings

Running multiple healings, one at a time

Certain healing programs should be used one at a time. In general, this is the better (and usually faster) way to do things. To start a schedule for multiple healings to run one-at-a-time, use all required Command Cards for the first healing, and then use the Go Card. Tell the cards that you want to schedule another healing, conditional on the first healing being completed. Then add the Command Cards for the second healing, and the use the Go Card again. The Go Card is used once for each healing "program" (Here, "program" is used to mean a set of Command Cards used for a particular healing purpose). Eg. If you want to run 10 different healings, one after the other, you will use 10 different sets of Command Cards, and use the Go Card a total of 10 times, while telling the cards what you want to do.

Running multiple healings, simultaneously

You may look up multiple diseases and use all their required Command Cards at once in a single healing, but this may be slower than prioritizing one at a time. To execute multiple healings simultaneously, use ALL required Command Cards for every healing before the Go Card is used. Similarly, you can also use ALL the Command Cards at once in a single healing, but this is far slower than selecting only the required Command Cards for a specific medical condition.

Cancelling a healing program

To cancel a running healing process, simply give the verbal command. For example: "Cancel the healing in progress". You may also cancel healings which are scheduled to run, but have not started yet (see ).

Interrupting a healing in progress

If you want to interrupt a healing in progress to run a more important healing, you must follow this order: First, cancel the running healing; secondly, apply the new healing; finally, if desired, schedule the old healing to run again after the new healing (or re-apply the old healing at a later time). You cannot "start-and-stop" healings when working with the Healing Cards (unlike the Free Healing Crystals). Every healing program has a "start procedure". Therefore, if any interruption occurs, the process will need to be restarted. As an alternative, you can schedule additional healings to occur after any current healing/s have completed. See .

Side effects

The Healing Cards are very powerful tools. Removal and healing of energetic diseases may cause temporary side effects. If you experience uncomfortable side effects, you may cancel the running healing program and restart it later (manually). Unlike the Free Healing Cards, you cannot control the power level of the Healing Cards.

Tutorial video



See also:



Interwiki

Deutsch • English • Español • Français • Italiano • Nederlands • Svenska • 中文 (edit language page)

Disclaimer
All content posted on this site is commentary or opinion and is protected under Free Speech. It is your right to educate yourself in health and medical knowledge, and to seek helpful information and counsel for your own benefit, and for that of your family. You are the one ultimately responsible for your health. This website offers instructions in energy healing techniques. Neither this website nor its owner is an accredited, licensed or certified school and the owner of this website is not a physician or licensed health care provider. The information, the views, services and products available through this site is not intended or implied to be a substitute for professional medical advice, diagnosis or treatment but as an alternative for those who are seeking solutions for better health. We do not claim to “cure” disease, but simply help you make physical and mental changes in your own body in order to help your body heal itself.
Full disclaimer
Retrieved from "http://www.protoi-healing.org/index.php?title=How_to_use_the_Protoi_Healing_Cards&oldid=3763"