From Protoi Healing

Revision as of 16:39, 21 June 2016 by Grayfox (Talk | contribs) (→‎Cannot obtain a specific diagnosis)

Jump to: navigation, search

How to use the Protoi Healing Cards



Starting the healing process

You can start a healing process with the Healing Cards by following these simple steps:

  1. Write a good, unique identification of the person or group you wish to heal on a piece of paper.
    This can include the person's name, birth date, location and so on; groups can be identified similarly, with unique information pertaining to that particular group. You can also use a photograph of an individual or group. If the healing is for yourself, you can write "me".

  2. Place this paper on the table.

  3. Select a healing tool to use: a Base Card or Pearlgonite, and place this healing tool on the identification paper.
    Pearlgonites have a much larger range of operation, see here.

  4. To look up a specific medical disease, search the medical disease database. You can also use the search box (top-right corner).
    If you only have specific symptoms of a medical illness, and are not sure which medical disease it corresponds to, find the nearest medical disease corresponding to those symptoms in the disease database.

    If there are a number of possible medical diseases related to your symptoms, you may schedule healing for all of them. See below: Setting schedules or Running multiple healings.

  5. On the disease category wiki page, see which subcode corresponds to the particular disease you wish to heal. Take note of the required Command Cards next to that subcode. For example, Acne vulgaris (ICD-10 code L70.0) requires cards 2.6 and 2.8.

    Note: If the healing is for another person and group 3 Command Cards are required (3.1 to 3.10), you must obtain that person's permission first. See below: Healings requiring group 3 Command Cards.

  6. Place the required Command Cards on top of the healing tool or the identification paper, the order does not matter.

  7. This step is optional, but recommended as it improves the effectiveness of the healing.
    Talk to the cards and describe the particular symptoms you are experiencing, as well as any other relevant information. This can only be done before the Go Card is used.

  8. Once you have selected all the Command Cards you wish to use and described your symptoms to the cards, use the Go Card by placing it on top of the Command Cards / healing tool / identification paper. This ends the programming of the healing tool and starts the healing process.



Conditions for the healing to run

Once the Go Card has been used, the healing process will run continuously until it is completed, even while you sleep. The healing will run as long as the target is within range of the healing tool (Base Card or Pearlgonite). If the target leaves the range, the healing process will pause until the target returns within range. If the target leaves the range of the healing tool for an extended period of time, the healing program may stop, so in such cases it is advisable to manually restart the healing when required.

How long does the healing take?

All healings require a certain amount of time, and some healings take longer than others. The time required is unique to each case, it is not related to the number of Command Cards required. You may notice an improvement of symptoms in as little as an hour, or it might take significantly longer.

You can read others' experiences with the Healing Cards and share your own on the Protoi-Healing Forum.

Base Card or Pearlgonite?

Base Cards and Pearlgonites may be used interchangeably as the healing tool. The only difference is the range of operation. This varies from 5,3 to 350 km for Base Cards, and from 33 to 2200 km for Pearlgonites. The range is dependent on the structure of the healing crystals within the healing tool, and also on the group/s of Command Cards used. See here for the complete list of ranges. Note that a healing which uses multiple groups of Command Cards would have an effective range equal to that of the group with the shortest range. Group 2 cards have the shortest range of operation, followed by group 1 cards which have a moderate range, and finally group 3 cards which have the largest range.

Due to the relatively short range of Base Cards compared with Pearlgonites, it may be useful to give the healing target a Base Card to carry with them after starting a healing process, so that they are always in range of the healing.

Working method by symptoms

Working method by diseases

The medical disease database is based on ICD-10 categories and codes. To look up a disease, you can use the medical disease database, or the search box (in the top-right corner of every page). You can also search by ICD-10 code. To find an ICD-10 code for a disease, you can search the WHO ICD-10 database. If you cannot find a disease category that is listed in the WHO ICD-10 database, you can register in the Protoi-Healing forum and request that it be added.

Missing Command Cards for subcodes in medical disease wiki pages will be updated soon.

  • Note: It is always strongly recommended to use the fewest possible Command Cards, while using all the cards that are required. If you instead use all 30 Command Cards, this will be much slower.
    See also (below): Recommendations for use.

Symptoms match a disease category, but are unlisted

If your symptoms match a disease category, but do not relate directly to a specific ICD-10 subcode on a disease page; for instance, you experience symptoms of Acne, but your symptoms do not match any of the following subcodes:

  • L70.0 Acne vulgaris
  • L70.1 Acne conglobata
  • L70.2 Acne varioliformis
  • L70.3 Acne tropica
  • L70.4 Infantile acne
  • L70.5 Acné excoriée des jeunes filles

In such a case, use the cards listed for "Others, not listed above or not known".

Cannot obtain a specific diagnosis

If you cannot obtain a specific diagnosis, look up the diseases which are most closely related to your symptoms, and run a healing process for each of these diseases with the listed Command Cards: you can do this either one at a time, which is generally fastest, or simultaneously (using all combined Command Cards at once in a single healing), which may be slower.

Alternatively, you could use all 30 Command Cards, however this should only be done as a last resort, since it greatly slows the process of healing. As an example, a healing of "L70.0 Acne vulgaris", using only the 4 Command Cards listed, executes 10 healing programs. However, all 30 Command Cards used collectively, executes 131 healing programs! Therefore, using all 30 cards in such a case may be 13 times slower than only using the required cards.

How to operate the Healing Cards

The cards contain a powerful Artificial Intelligence (AI) that listens to your voice and executes permissible auditory commands. All instructions or commands should be given verbally.

Describing your symptoms

Before the Go Card has been used, you can verbally describe your symptoms and any other related information to the cards, in order to improve the effectiveness and speed of the healing. The AI in the cards uses this information to improve the accuracy of the healing process, beyond the standard required Command Cards. This may only be done before using the Go Card. If you missed some important information and already used the Go Card, simply cancel the healing in progress with a verbal command, and begin the process again.

Setting schedules

You can set schedules when using the Healing Cards. For instance, you can start a healing, and then schedule another healing to run, conditional on the first healing process being completed: To do this, simply give a verbal command that the new healing is conditional on the current one (or ALL currently scheduled healings) being completed. Alternatively, you can set a time schedule for a certain healing to start, however, once a healing process has started, it cannot be interrupted without having to be completely restarted (by using the required Command Cards again, followed by the Go Card). You may also rearrange the order of pre-scheduled healings at any time, with no impact on the current healing in progress.

Setting priorities

You can set priorities when running multiple healings, one at a time, using the above method. Simply instruct the cards which healings to give more priority than the others, and these healing programs will run with the given priority.

Cancelling a healing program

To cancel a running healing process, simply give a verbal command to stop. For example: "Cancel the healing in progress". You may also cancel healings which are scheduled to run, but have not started yet (see setting schedules).

Interrupting a healing in progress

If you want to interrupt a healing in progress to run a more important healing, you must follow this procedure:

  1. First, cancel the running healing.
  2. Secondly, apply the new healing (to run immediately).
  3. Finally, if desired, schedule the old healing to run again after the new healing (or re-apply the old healing at a later time).


You cannot "start-and-stop" healings when working with the Healing Cards (unlike the Free Healing Crystals).
Every healing program has a "start procedure". Therefore, if any interruption occurs, the process will need to be restarted. As an alternative, you can schedule an additional healing to run immediately after the current healing has completed, or following all scheduled programs.

Healings requiring group 3 Command Cards

If the healing is for someone else, and group 3 Command Cards are needed (3.1 to 3.10), you must obtain their permission before the cards will start the healing. The cards listen to your voice, so you may obtain this permission over the phone, within range of the cards, which hear better than a human ear. You may also obtain this permission in advance, when away from the cards, and then later instruct the cards to get the required permission from your memory. The cards will not search your memory without your permission. The person can also grant written permission in advance, in this case you may use this paper for identification.

See also: How do the Healing Cards work?

Running multiple healing programs

One at a time

Certain healing programs should be used one at a time. In general, this is the better (and usually faster) way to do things. To start a schedule for multiple healings to run one-at-a-time, use all required Command Cards for the first healing, and then use the Go Card. Tell the cards that you want to schedule another healing, conditional on the first healing being completed. Then add the Command Cards for the second healing, and the use the Go Card again.

The Go Card is used once for each healing "program" (Here, "program" is used to mean a set of Command Cards used for a particular healing purpose). For example, if you want to run 10 different healings, one after the other, you will use 10 different sets of Command Cards, and use the Go Card a total of 10 times, while telling the cards what you want to do.

Simultaneously

You may look up multiple diseases and use all their required Command Cards at once in a single healing, but this may be slower than prioritizing one at a time. To execute multiple healings simultaneously, use ALL required Command Cards for every healing before the Go Card is used. Similarly, you can also use ALL the Command Cards at once in a single healing, but this is far slower than selecting only the required Command Cards for a specific medical condition.

Running healings for different people simultaneously

All healings schedules used with the Healing Cards are independent, based on the person for whom they are scheduled. Therefore, you may schedule or run multiple concurrent healings for many different people at the same time, as long as they are all in range of the healing tool. There is no limit to the number of people you can add to a single healing tool, and this does not affect the speed of operation.

Side effects

The Healing Cards are very powerful tools. Removal and healing of energetic diseases may cause temporary side effects. If you experience uncomfortable side effects, you may cancel the running healing program and restart it later (manually). Unlike the Free Healing Crystals, you cannot control the power level of the Healing Cards.

Recommendations for use

Be as specific as possible

The Healing Cards have been designed to be easy to use, while also being exceptionally comprehensive. The 30 Command Cards contain millions of preprogrammed commands, altogether comprising 131 healing programs at present, though these are constantly being updated and new programs are added regularly. Although they are very powerful, healing takes time. Therefore it is far more efficient and quicker to use a specific healing "package", made up of specific Command Cards, as closely related to your symptoms as possible; than it is to use all 30 Command Cards at once.

To illustrate this, let's say, for example that at least one of the following is true:

  • You have received a specific diagnosis of Acne vulgaris (also known as Cystic acne).
  • You currently experience the symptoms which characterize Acne vulgaris: open or closed comedones (blackheads or whiteheads) and pustular nodules (Source: ICD10Data).

Searching the medical disease database for "Acne" or "Acne vulgaris" will yield a result of "L70.0 Acne vulgaris", where "L70.0" is the specific ICD-10 code for this disease (medical disease page for Acne).

Note that "Acne vulgaris" requires 4 Command Cards: 1.5, 2.6, 2.8, and 2.10. These 4 cards collectively contain 10 healing programs. Running all 10 of these as a single healing "package" for your Acne vulgaris symptoms is the fastest, most efficient method to use the Healing Cards.

Using all 30 Command Cards is much slower

(Continued from the above example)
Instead of using a specific healing "package", you could alternatively use all 30 Command Cards. However, this would mostly treat the side effects and all related minor issues before the healing of the main disease is started! The healing would take much longer overall, as 131 healing programs are being executed, rather than only 10.

Therefore, in general, it is recommended to use the fewest possible Command Cards, while using all the cards that are listed for your specific symptoms or medical disease.

Describe your symptoms to the cards

Describing your symptoms to the cards, before the Go Card has been used, improves the accuracy and efficiency of the healing for your specific symptoms. This is always strongly recommended. However, this must be done before the Go Card has been used. If you already started a healing without specifying your symptoms (or the symptoms of the person you want to heal), you can cancel the healing and start the process again.

Tutorial video



See also:



Interwiki

Deutsch • English • Español • Français • Italiano • Nederlands • Svenska • 中文 (edit language page)

Disclaimer
All content posted on this site is commentary or opinion and is protected under Free Speech. It is your right to educate yourself in health and medical knowledge, and to seek helpful information and counsel for your own benefit, and for that of your family. You are the one ultimately responsible for your health. This website offers instructions in energy healing techniques. Neither this website nor its owner is an accredited, licensed or certified school and the owner of this website is not a physician or licensed health care provider. The information, the views, services and products available through this site is not intended or implied to be a substitute for professional medical advice, diagnosis or treatment but as an alternative for those who are seeking solutions for better health. We do not claim to “cure” disease, but simply help you make physical and mental changes in your own body in order to help your body heal itself.
Full disclaimer
Retrieved from "http://www.protoi-healing.org/index.php?title=How_to_use_the_Protoi_Healing_Cards&oldid=4103"